veneer Archives - Native Custom Stone

Why Should You Use Manufactured Stone Veneer In a Bathroom

Manufactured stone veneers are getting used in more and more places around the house. Everyone has seen how good it looks around a fireplace as a center piece for a room. It looks equally good on the outside of a home because it lends a certain rugged charm but have you ever considered using it in your bathroom? The basic qualities of a manufactured stone veneer are its amazing durability and its almost complete resistance to moisture and staining. If you are shopping for the perfect building materials for your bathroom then durability and stain resistance are probably the two things you are specifically searching for.

Up until recently, only the most affluent homes could have natural looking bathrooms covered in marble and other high end stone. The price tag on bathroom projects like these would sometimes rival a small house but with a manufactured stone veneer they became a much more practical design decision. Even middle income homeowners can afford to own:

Unique vanity top designs. These are made out of stylish stone that really adds a dash of elegance to a room.
Decorative accents made from cultural marble. Marble is always a hit and most people cannot tell natural stone apart from its manufactured counterpart.
Cultured Onyx, Granite and Piedrafina. These stones and many more are available in manufactured varieties and they are very easy to work with.

If you have never seen manufactured stone then you may think that it will look cheap or fake. Most manufactured stones are actually made from rock dust instead of plastic or synthetic materials so it is an actual stone, just not a naturally formed one. This process of formation is the main reason that manufactured stones are so easy to work with. Liquid polyester is utilized to make all the rock dust stick together and then it is covered in a non porous coating that resists stains and spotting. The end result is that you are left with a bathroom that doesn’t absorb moisture or hold onto odors and it can be easily cleaned with soap and water for the most part.

There is one thing to be careful of when buying manufactured stone veneers and that is to get them from a reputable company. Some will skimp on the manufacturing process and it can result in you buying inferior manufactured stone.

How to Remove Mortar from Manufactured Stone Veneer

Manufactured stone veneers have become a very popular project for do it yourself homeowners. The stone adds elegance and rustic charm to everything from your fireplace to the outside of your home. Since it basically amounts to sticking rocks in mortar, building a manufactured stone veneer seems like it would be very easy but it can go wrong quickly. A veneer can be ruined by things as simple as:

Accidentally wiping mortar that’s still wet
Getting excess mortar onto the stones surface
Overly humid conditions
Incorrect stone placement

Once the stones are in place, it can be a chore to remove mortar from them without damaging the stones. However, if you do make a mistake and need to remove your mortar, it can be done in seven easy steps:

Gather the equipment that you will need for the job: water, dish detergent, two stiff brushes that are not wire and rags.
If the mortar is still fresh then you must wait for it to dry completely. In most situations a full day and night will be needed to thoroughly dry fresh mortar.
Mix up a warm water and dish detergent solution. The only trick to this step is that you cannot have bubbles in the mixture so keep mixing until all the bubbles disappear. Set it aside for now.
Using one of your stiff brushes, start wiping it across the mortar that you need to remove from your manufactured stone. It may help to put the brush at an angle so you are wiping at the contact point between the mortar and the manufactured stone. Try to get as much of the mortar off as possible during this step.
Use one of the rags to remove all the dust that has been accumulated on the stones surface.
Take your second brush and dip this one into your water and dish detergent mixture. Use the same technique as before to remove the rest of the mortar and give the other parts of the exposed stone a good scrub while you are there.
Now give the stone another once over with regular water and look for any residual mortar. It has probably all been removed at this point but if you can still see some just repeat step five again.

How to Repair Cracked Manufactured Stone Veneer

Quite a few homeowners have decided to install a manufactured stone veneer instead of natural rock. In most situations it is a smart decision because they look the same, last forever and cost a lot less than the natural stone equivalent. Over time any type of veneer can become damaged, cracked or chipped just through normal wear and tear. Unlike natural stone, you can repair your own manufactured stone veneer in 5 easy steps. Before you get started with repairs, there are a few items that you will need to get including: a small broom, trowel, cold chisel, wire brush, a hammer, grout bag and mortar mix.

Step One: Find the damaged veneer piece and place the cold chisel on the grout line. It needs to be at a forty five degree angle with the tip of the chisel facing inward towards the stone piece. Lightly tap the hammer on all sides of the broken piece to loosen the grout and remove the stone. If it refuses to come loose, you may need to chip away at the piece itself until it comes free.
Step Two: Use the wire brush to clear away the debris and dust from where the stone piece was removed in step one. Be careful of the wire mesh inside the socket because you do not want to pull it away from the foundation of the veneer. That mesh is what you will be securing the new piece onto.
Step Three: Measure the hole that was left and find a piece of stone veneer that will fit into it. If you cannot find one small enough you can use a wet saw to cut a large piece down to size.
Step Four: Get a bucket and mix the mortar with water until it thickens into a paste.
Step Five: Apply a thin coat to the wire mesh, otherwise known as a Skim coat. Then you can apply a half inch thick layer of mortar onto the Skim coat using a trowel. If that is too big then you can substitute a putty knife. Now apply a half inch layer of mortar to the back on the replacement stone piece and press it solidly into place. Once the piece is in position you can use a grout bag to squeeze out a line of grout around the perimeter of the new piece. After that the only thing left to do is wait for it to dry.

10 Steps to Install Custom Stone Veneer Around Windows

A custom stone veneer is a great way to add a little style to your home. It can make your house look like it was built entirely from stone but at a fraction of the cost of natural stone. To save a little money, homeowners with a do it yourself frame of mind have attempted to install their own custom stone veneer. As long as you’re careful, it is possible but you have to be sure and take extra precautions around your windows. If they are not sealed properly then you can leave yourself open to leaks and future water damage.

Before you get started on the steps below, you need to gather a few materials. For this project you will need:

Metal weep screed
Metal cap flashing
Silicone Adhesive

Step 1: On the plywood boards that form the outside of the house, known as the sheathing, you will find flashing tape installed. Squeeze out a beaded line of silicone adhesive in a zigzag pattern across that tape.

Step 2: Take your metal cap flashing and press it solidly against the flashing tape with the bottom edge against the top edge of the window.

Step 3: Now you will need to nail a metal weep screed into place over the top of the metal cap flashing. This will help to divert water away and act as a moisture guard.

Step 4: Starting at the bottom of the wall, begin installing the veneer and work your way up. When you get to the last piece of veneer, you have to measure the distance between it and the edge of the window and mark a line onto the back of the veneer.

Step 5: Cut along the line that you marked using an electric grinder but only cut about halfway through the veneer.

Step 6: Now place the veneer face down on a worktable with the line you cut running along the edge of the table.

Step 7: Using a hammer, gently tap on the part of the veneer sticking out past the table to break it along the line and remove excess material.

Step 8: Spread water over the back of the veneer piece to keep it from absorbing water from the mortar. If you don’t, it will cause the mortar to crack.

Step 9: Apply a half inch of mortar to the back of the piece and onto the wall where it will be placed. Then press the piece firmly into position.

Step 10: Repeat these steps as needed for the remaining windows.

Seal Your Custom Stone Veneer in Just 4 Easy Steps

Adding a manufactured stone veneer to your home can go a long way toward improving its curb appeal and possibly its overall value as well. If you are trying to sell your house, a custom stone veneer can give it an upscale look that will set it apart from your neighbors. In order to keep costs down some homeowners have decided to tackle the project on their own instead of hiring an expert for the installation. The process is not too difficult and even inexperienced people can install it if they pay close attention to detail. However do it yourselfers often make the mistake of forgetting to seal their work.

Adding a sealant to your manufactured stone veneer is not expensive and can be done very easily if you follow these four steps:

Do not try to add a sealant to your veneer for at least a month. If you seal the veneer too soon you will trap in the moisture and defeat the purpose of sealing it in the first place. Most stone veneers need 30 days to cure properly.
Purchase sealant that is penetrating but can still breathe. If you are unsure about which to purchase, just ask the salesperson at your local hardware store and they should have no problem directing you to the right product. Use a paint brush to apply a thin coating of the sealant over the entire surface of the veneer.
Read the sealant’s directions for how long it needs to dry and follow it exactly. You can really mess up the finish of your veneer if you try messing with your sealant before it has had time to dry all the way.
After the first coat is completely dry, you need to apply a second coat the same way. Some sealants need another coat after that but unless the directions specifically call for it, never apply more than two coats.

5 Steps for Creating a Custom Stone Veneer Accent Wall

Manufactured Stone has always been a popular building material because it gives a home a natural look and is more cost effective than natural stone. If you have the budget it is always best to let a professional construct your veneer for you but if you are comfortable working with your hands, it is possible to just do it yourself as well.

Before you get started you will need to gather up a few tools and materials like a trowel, mortar mix, metal lathe, 2 inch galvanized nails, plastic moisture barrier, stone veneer, hand rake, wire brush, a hammer and sand.

Once you have everything gathered up you are ready to start with step one:

Secure a plastic moisture barrier over the surface of the wall that will be your veneer. It is best to use painters tape in case you need to make adjustments or move the barrier. Next you will need to use the galvanized nails to secure the metal lathe to the moisture barrier. Try to keep the nails 6 inches apart and try to hit the wall studs as much as possible.
Read the mortar package then mix the sand and mortar accordingly. This will create a cement mixture that you will begin applying to the lathe. Use the trowel to spread a thin layer of the mixture over all of the exposed lathe.
While the cement mixture is still wet you need to use the hand rake to either make scratches in the cement or just rake it. This will help your stone to adhere to the surface more securely. After you have finished you need to let it set undisturbed for forty eight hours.
Take one of your stone veneer pieces and apply a layer of mortar across the back about a half inch thick. Then press it into place on the wall near the top. Press firmly enough that some of the mortar squeezes out from beneath it. Keep placing pieces until you reach the bottom and try to keep the pieces as tightly spaced as possible. It will reduce the amount of mortaring you will have to do later. Let everything dry for about an hour or two.
Go back across the surface and press mortar into any cracks that you see between the pieces. Use a wire brush to clean the excess cement of off the stone pieces.

4 Steps for Applying Manufactured Stone Siding

Adding manufactured stone veneer to your home is a great way to add value, and make your home more beautiful. Stone has been a staple building material since the beginning of time. Manufactured, or custom stone veneer, has changed up the game a little bit though. It is less expensive, and much easier to install. In fact, this particular project can be completed over the weekend with little or no professional help. There are many different styles of manufactured stone veneer to choose from, so make sure you choose one that perfectly accents your home.

When you have chosen your perfect manufactured stone veneer, you’re ready to get started:

Prepare the surface that you will be applying the siding to. First you will need to create a moisture barrier by affixing house wrap or roofing felt to the area. If you are preparing a masonry wall you can skip the moisture guard. Next you will need to attach a metal lath to the wall with screws or nails to give the mortar a way to gain purchase on the wall.
Start to apply the mortar mixture to the lath in a layer that is between 1/8 and 1/16 thick.
Start applying the stones to the mortar by holding them in place for 5 to 10 seconds. Try to keep them as tightly spaced as possible because it will make filling in the gaps much easier later on.
If you fit all of the stones tightly together then you may be able to just fill in the spaces between with an S type mortar. If not then you may have to cut small pieces of stone to put between the larger stones. The best way is to mark a stone using a pencil and then use a cut off grinder to give it the correct shape.

Native Custom Stone, a lead manufacturer of custom stone veneer has high quality stone in many varieties. They are sure to have the perfect stone to accent your home, or commercial building.

Using Manufactured Stone for Commercial Projects

Manufactured stone veneer offers many features that real stone can’t, and if taken advantage of it can make a big difference in the success of your next construction job. If you are familiar with using natural stone in a lot of your projects, maybe reading a little bit about the great benefits of custom stone will changer your mind. You will have many projects done in half the time, at a fraction of the cost.

A few of the ways the manufactured stone surpasses natural stone are:

Manufactured stone costs a small fraction of the current price for regular stone. This can come as a surprise to construction companies because they view natural stone as being cheap and plentiful.
Since a manufactured stone veneer is all part of the same piece, it can be installed much faster than normal stone. This is a benefit to commercial locations that do not want part of their building to be off limits for an extended period of time because if foot traffic is impeded it can result in lost revenue.
Manufactured stone veneers are much safer than a standard stone facing. If a natural stone were to come loose and hit someone it could cause serious injuries. Since the manufactured stone veneer is a single piece, you never have to worry about parts coming loose.
You will stand out from the crowd. Most commercial companies want to look businesslike and stylish so they tend to use a lot of stone in their construction. It looks good but after awhile it all tends to blend together. If you use a manufactured stone veneer, you can get any look that you want. You can have a veneer that perfectly emulates natural stone or you can have a veneer that perfectly reflects your own sense of style. You have complete control over how it will look in the end.

A great manufactured stone veneer is key when working on a commercial project. Customers are sure to be pleased with the quality, efficiency, and price of this great product.

5 Steps to a D.I.Y. Custom Stone Veneer Fireplace

A GA custom stone veneer fireplace can give you the perfect place to gather with friends and family on cold nights. It also adds a lot of value to your home with a fraction of the cost in comparison to natural stone. If you have a DIY frame of mind then with a little preparation, you can tackle the project yourself. Or even better, you may want to recruit a friend to lend a hand.

The following steps will help to illustrate the right way to install a custom stone fireplace:

Measure twice, cut once – Go over your plans to see if they are simple enough for you to implement. Measure the wall and make sure that you have all the materials that you need on hand.
Start sizing the stone – Whenever possible, let the stone merchant cut the stones to your specifications. They have the experience and tools to do a much better job than you would be able to do. If you do have to cut the stone yourself, make sure that you are using a diamond tipped drill.
Time to mortar – Make sure that the mortar you are using was designed for the task at hand. Start assembling the fireplace according to your design and always remember to put the mortar on the sides of stones that can’t be easily seen. Let the mortar sit until it has fully dried.
Final check – Once the mortar is dry, give the fireplace a close inspection to find any cracks that you may have missed. If you find one, seal it with more mortar.
Clean Up – You can choose to seal your stone, but it’s not required. Now you’re ready to enjoy your new fireplace.

A great GA custom stone veneer manufacturer will have the perfect stone for your fireplace, or DIY project. Find a distributor near you and get started renovating your home today.

The Elegant Look of Faux Stone Veneer

Home improvement is something that is on every homeowner’s mind. Sometimes a room just seems to be missing something, as far as design goes; as if just a little something would make a world of difference. Often what the room is lacking are accent pieces. Accent pieces are often what can bring a room to life and create just enough balances and counter balances to make the room really glow. One great product to use and that we will be discussing is faux stone veneer.

Faux stone veneer, as the name states, is fake however this does not mean that it looks fake. In fact, to any eye this manufactured stone looks authentic. This is largely due to innovative designs and processes in which the manufactured stone is molded directly off of natural stone to get a look that is precisely like the real stuff. This really ups the ante on appeal, and when you take into consideration the cheaper price, better durability and lower maintenance, there is very little that keeps people from opting for faux stone veneer.

Another thing to consider when working with this product is the actual heft of it. Obviously it is much lighter than natural stone and so requires less structural support and installation than real stone. Faux stone veneer can also be incorporated into small or large products and come in a variety of colors and designs, including stone but also woods, to suit any room or project that needs enhancing or full-scale remodeling. Make that fireplace really stand out with a manufactured stone veneer setting, or finish off the bathroom counters. The possibilities are many, so let your mind wander and explore the delights of having faux stone veneer a part of your interior or even exterior decorating! You can easily work this stone into the exterior of your home and even into your landscape. Give Native Custom Stone a call today to help decide which stone veneer would make your home look great.