Custom Stone Manufacturer

Questions? Call us at:   (888) 823-0745

You are here: Home / Archives for custom stone fireplace

5 Steps to a D.I.Y. Custom Stone Veneer Fireplace

A GA custom stone veneer fireplace can give you the perfect place to gather with friends and family on cold nights. It also adds a lot of value to your home with a fraction of the cost in comparison to natural stone. If you have a DIY frame of mind then with a little preparation, you can tackle the project yourself. Or even better, you may want to recruit a friend to lend a hand.

The following steps will help to illustrate the right way to install a custom stone fireplace:

  1. Measure twice, cut once – Go over your plans to see if they are simple enough for you to implement. Measure the wall and make sure that you have all the materials that you need on hand.
  2. Start sizing the stone – Whenever possible, let the stone merchant cut the stones to your specifications. They have the experience and tools to do a much better job than you would be able to do. If you do have to cut the stone yourself, make sure that you are using a diamond tipped drill.
  3. Time to mortar – Make sure that the mortar you are using was designed for the task at hand. Start assembling the fireplace according to your design and always remember to put the mortar on the sides of stones that can’t be easily seen. Let the mortar sit until it has fully dried.
  4. Final check – Once the mortar is dry, give the fireplace a close inspection to find any cracks that you may have missed. If you find one, seal it with more mortar.
  5. Clean Up – You can choose to seal your stone, but it’s not required. Now you’re ready to enjoy your new fireplace.

A great GA custom stone veneer manufacturer will have the perfect stone for your fireplace, or DIY project. Find a distributor near you and get started renovating your home today.

The Importance of Sealing your Manufactured Stone Veneer

Manufactured stone veneer from Native Custom Stone is a great alternative to natural stone. It cost tons less than natural stone, and is much easier to install. To keep your manufactured stone veneer looking great and lasting you do need to know the importance of sealing your manufactured stone after it’s installed.

Sealing your Manufactured Stone, or Custom Stone, prevents from:

  • Cracking or Chipping of the Stone and Mortar
  • Swelling and Breaking
  • Mortar from absorbing water
  • Color fastness in the Stone

If you are installing Manufactured Stone Veneer on the exterior of your home sealing it is crucial to prevent against weathering. If you don’t seal your Custom Stone Veneer you risk it becoming saturated and could break, crack, or lose color. Also, sealing your stone will help protect the Stone Veneer from mud and dirt stains.

However, if your custom stone is on the interior of your home it’s not mandatory, but it is recommended.

  • If you have a Custom Stone Fireplace you will want to make sure to prevent it from soot stains.
  • In bathrooms it’s important because of the excessive moisture in the air.
  • In Kitchens it really is a preference. If you install a counter top you are going to want to seal your stone to prevent against stains. However, if you have Custom Panels accenting areas in your kitchen you may want to protect them from accidents but, it’s not necessary.

The benefits of Manufactured Stone Veneer are abundant and you can use it all over your home. This type of stone is great for do-it-yourself projects or large contracting jobs. It’s light-weight and costs much less than Natural Stone, though it looks natural and beautiful in any setting. Native Custom Stone offers a large selection of Manufactured Stone Veneer. Have a look at their gallery and visit a distributor near you.