• Home
  • Styles
  • Panels
  • Accessories
  • GO-BRICK®
  • Vendors
  • Technical Details
  • Contact
  • Shop
Native Custom Stone

Custom Stone Manufacturer

Questions? Call us at:   (888) 823-0745

  • Home
  • Stone
    • Country VillaCounty Villa Stone
    • Castle RockCastle Rock
    • Rubble StoneRubble Stone
    • Stack StoneStack Stone
    • Ledge Stoneledge stone
    • River Rockriver rock
    • Field Stonefield stone
  • Panels
    • CustomFit PanelsCustom-Fit DIY Stone Panels
    • Go-StoneGo-Stone DIY Stone Panels
    • AccessoriesStone Accessories
  • Cast
  • Brick
  • Find A Vendor
  • Technical
  • Contact
  • Shop
You are here: Home / Archives for stone repair

How to Repair Cracked Manufactured Stone Veneer

Quite a few homeowners have decided to install a manufactured stone veneer instead of natural rock. In most situations it is a smart decision because they look the same, last forever and cost a lot less than the natural stone equivalent. Over time any type of veneer can become damaged, cracked or chipped just through normal wear and tear. Unlike natural stone, you can repair your own manufactured stone veneer in 5 easy steps. Before you get started with repairs, there are a few items that you will need to get including: a small broom, trowel, cold chisel, wire brush, a hammer, grout bag and mortar mix.

  • Manufactured Stone | Custom Stone Veneer RepairStep One:  Find the damaged veneer piece and place the cold chisel on the grout line. It needs to be at a forty five degree angle with the tip of the chisel facing inward towards the stone piece. Lightly tap the hammer on all sides of the broken piece to loosen the grout and remove the stone. If it refuses to come loose, you may need to chip away at the piece itself until it comes free.
  • Step Two:  Use the wire brush to clear away the debris and dust from where the stone piece was removed in step one. Be careful of the wire mesh inside the socket because you do not want to pull it away from the foundation of the veneer. That mesh is what you will be securing the new piece onto.
  • Step Three: Measure the hole that was left and find a piece of stone veneer that will fit into it. If you cannot find one small enough you can use a wet saw to cut a large piece down to size.
  • Step Four: Get a bucket and mix the mortar with water until it thickens into a paste.
  • Step Five: Apply a thin coat to the wire mesh, otherwise known as a Skim coat. Then you can apply a half inch thick layer of mortar onto the Skim coat using a trowel. If that is too big then you can substitute a putty knife. Now apply a half inch layer of mortar to the back on the replacement stone piece and press it solidly into place. Once the piece is in position you can use a grout bag to squeeze out a line of grout around the perimeter of the new piece. After that the only thing left to do is wait for it to dry.

Filed Under: DIY, Maintenance and Installation, Manufactured Stone, Tips and Advice Tagged With: building materials, custom stone, manufactured stone, manufactured stone veneer, masonry, repair crack, stone repair, stone veneer, veneer, veneer repair

Search This Site

Technical

  • Download Our Brochure
  • Go-Stone Panels
  • CustomFit® Stone Panels
  • Stone Installation
  • Cleaning Instructions
  • Technical Details

Testimonials

We had the complete exterior of our home re-done by Native Custom Stone 2 years ago and are STILL in love with the results!! They took a very plain-looking wooden exterior and made it into something that is striking and eye-catching.

Find a Vendor

Filter by

No results found in this location. Please try again.

Get Directions

Add Waypoint
show options hide options
Print directions Reset directions
Fetching directions......
Reset directions
Print directions

Contact Us

Stone Types

  • Castle Rock
  • Country Villa
  • Field Stone
  • Ledge Stone
  • River Rock
  • Rubble Stone
  • Stack Stone

Tech Links

  • CAD & Installation Details
  • BIM | Revit | Autocad
  • Testing & ICC-ESR Report
  • 3-Part Spec & MSDS
  • Product Warranty
  • LEED Details
  • Cleaning Instructions
  • Product Data

Resources

Native Custom Stone Lunch and Learn | Stone Installation Information Download Our Brochure | Native Custom Stone Brochure Download

Contact Info

Native Custom Stone
236 Hightower Parkway
Dawsonville, Ga 30534
Phone: (888) 823-0745
Phone: (706) 216-5545

Follow Us!

Follow Us on FacebookFollow Us on LinkedInFollow Us on Blog

Native Custom Stone, 236 Hightower Parkway, Dawsonville, Georgia 30534
Website Designed by: Interactive Search Marketing |  Sitemap  |  Privacy Policy