Custom Stone Manufacturer

Questions? Call us at:   (888) 823-0745

Home » Faux Stone Veneer » Page 3

Learn More about Adhered Stone Veneer

Adhered stone veneer by far the superior choice when one is deciding between adhered stone veneer and cast stone.  Yet, there is often some misunderstanding between the two. Here are a few differences between them to show that adhered stone veneer is by far the best material for home improvement.  It really comes down to the taste and budget of the homeowner.  Both can come in any number of shapes, sizes and/or colors, but adhered stone veneer has the bonus of being much easier to remove when one wants to alter the overall look of a room.  Both  can be used in any interior decorating project imaginable with a great warranty.  In respect to the cast products, it is normally considered to be “up for good” once it’s in place.

Adhered stone veneer:

1)      Lightweight

2)      Held in place using something like type S mortar.

3)      Doesn’t add to the load-bearing ability of the existing wall.

4)      Not as permanent as the alternative in the event the homeowner wants to change the room’s theme.

5)      Extremely versatile.

6)      Works great on practically any exterior wall.

7)      It can be cut or pieced together as the job goes for the best result, allowing more option as the job goes on where cast stone cannot.

Cast stone:

1)      Heavier in materials.

2)      Does add the load-bearing ability of the existing wall.

3)      It is a permanent addition to the wall typically enhanced by something like brickwork.

4)      It is not easy to remove.

5)      Requires more to affix it to the wall.

6)      Weighs about the same as limestone.

7)      Usually cut the specified design discussed between the dealer and homeowner.

Both of these products are great depending on what a homeowner wants.  Adhered stone veneer is great because it’s much easier to install and can usually be done by the homeowner.  If after a few years a new stonework idea seems right, the adhered stone veneer can be removed and a completely new color scheme put in its place.  To learn more contact a leader in installation today.

Fireplace Stone Veneer fits any Budget

Fireplace stone veneer is an affordable, lightweight material that is gaining more popularity over the real thing.  Offered in any color, style or surface texture fireplace stone veneer covers it all.  When this product comes with an oustanding warranty there’s even more reason to pick this over the much more expensive alternative.  It’s so versatile that it can be installed over existing:

1)      Brick

2)      Wood

3)      Block

On many projects, fireplace stone veneer is so easy to install that a homeowner can do it themselves in a few days.  This saves even more money in respect to the cost of hiring a company to install real stone.  The lightweight alternative comes in any imaginable size which makes it easy to manipulate without much effort.  There is a great installation company ready to help, but for those interested in putting in the fireplace stone veneer on their own, here are a few steps to follow.

Proper concrete preparation:

1)      Make sure the concrete surface isn’t smooth/slick.  Without a coarse surface the fireplace stone veneer is less likely to properly adhere and stay in place.

2)      Use sandpaper or a sander to create a coarse surface if one does not exist.

3)      Sand the entire surface to make sure the whole area is consistent.

4)      There’s no need to put a great deal of pressure on the existing surface as only the top layer must be rough in order that the fireplace stone veneer will remain in place.

Proper wood exterior preparation:

1)      Waterproof the wooden surface.  A cement board is a great idea to achieve this step.  There are a few companies that manufacture this cement board.  Any home improvement center or hardware store can help find the best fit.

2)      Use rustproof screws to hold it in place over the wood surface.

3)      Over the first layer affix felt paper.

4)      The third layer should be a diamond mesh for the best results.

5)      Finally, S mortar should finally be applied sparingly with just enough to cover the layer beneath.

Putting the fireplace stone veneer in place:

1)      Use only S type mortar.

2)      Mix the mortar to the consistency of a thick paste.

3)      Put a layer of S type mortar on the back the fireplace stone veneer at least two inches thick.

4)      Make lines in the mortar as that will help it stick in place instead of smoothing it out completely.

5)      Make sure there’s about half an inch between each stone.

6)      Don’t worry about too much space between the materials as it will be relatively easy to find a stone to fill gaps.

7)      Wipe away excess mortar.

8)      Let the project dry for several hours.

9)      Use grout to fill the spaces in between to create a flush appearance.

Fireplace stone veneer is relatively easy to put in place.  Yet, if one would rather a leader in the fireplace stone veneer business do all the work, there’s a great one close by with years of experience.  There’s no need to go through all the extra expensive of real stone with this product has the same great look at a fraction of the price.